Phone Radiator Fan Charging Plug Headset
$79.99 AUD
Approx $54.79 USD
Description:
DescriptionMaterialOtherProduct AttributesOrdinaryPackage Size100*100*30(mm)
Design: Geometry
Design: Mast
Product name: Nubia Ice Terminal
Product 1: Nubia Blade's Edge Ice Terminal
Product 2: Nubian Red Mgagio Wind Ice Wharf
Compatible width: 64-86 mm
Fan speed: 8000 rpm
Features: Cooling
Phone Radiator Fan with Charging & Headset Pass-Through — Snap-On Cooling for Lag-Free Gaming
Keep your phone cool, powered, and connected while you play. This phone radiator fan clamps on in seconds and delivers active cooling, pass-through charging, and headset access so you can grind longer without thermal throttling, battery drain, or tangled cables. Perfect for mobile esports, long streaming sessions, and summer gameplay.
Why You’ll Love It
- Instant performance boost: Active cooling helps prevent CPU/GPU throttling, keeping frame rates steadier.
- Charge while you play: Side-mounted pass-through keeps cables out of the way.
-
Stay in comms: Dedicated headset port (model-dependent) lets you plug in earphones/mic without fighting
the cooler.
- Snap-on convenience: Spring clip or magnetic plate fits most phones/cases fast.
Key Features
High-RPM Micro Turbo Fan
A compact, high-static-pressure fan pulls heat off your phone’s hotspot area. Tuned blades and a balanced motor move serious air with low
tonal noise, keeping temps down even during 60/90/120 Hz gaming.
Thermoelectric (Peltier) Option (Model-Dependent)
Premium versions add a TEC cold plate for rapid surface cooling. Anodized heat sink + graphene/ceramic contact spreaders accelerate heat
transfer for quick temp drops.
Pass-Through Charging
USB-C input routes power to your phone so you can charge while cooling. Angled connector keeps your grip clear;
strain-relief minimizes wear during long sessions.
Headset/Audio Passthrough
Built-in 3.5 mm jack or USB-C audio passthrough (varies by model) preserves wired headset use for
low-latency chat and footsteps—no dongle juggling.
Low-Profile, Game-Friendly Design
Slim body avoids trigger zones and keeps rear cameras clear. Soft, anti-scratch pads protect your phone; adjustable clamp handles most 65–90
mm widths.
Quiet & Smart Control
Two to three fan modes (Silent / Balanced / Turbo). Dynamic LED indicator for power and mode. Some variants expose speed control via a
simple button cycle.
Travel-Ready Build
Lightweight shell, braided USB-C cable, and a compact form factor that fits controller grips and backpack pockets.
Benefits You’ll Notice
-
Steadier FPS & smoother touch: Lower temps reduce throttling so inputs and frame pacing stay consistent.
- Cooler hands, better grip: Heat pulled away from the back panel keeps your hold comfortable.
- Longer sessions: Power passthrough prevents mid-match battery anxiety.
- Clear comms: Dedicated headset port keeps your audio stable and cable path clean.
Compatibility
- Phones: Most iOS/Android models from 67–87 mm width; works with many slim to medium cases.
- Power: USB-C 5 V input (TEC models may request up to 10–12 W; standard fan models ~2–5 W).
- Audio: 3.5 mm or USB-C passthrough varies by version; check your phone’s supported audio over USB-C.
How to Use
- Power: Plug the cooler’s USB-C into a wall adapter, power bank, or console dock.
- Mount: Center the cooler on the phone’s hottest zone (typically near the SoC/top third). Clamp gently.
-
Connect: Route charging to your phone via the cooler’s pass-through; plug your headset
into the provided jack/port.
- Select Mode: Tap to choose Silent, Balanced, or Turbo.
- Play: Enjoy stable frames; step down to Silent for menus or streaming.
Pro Tips
- Placement matters: Align the cold plate with the chipset area for best results.
- Airflow path: Don’t block the fan intake/exhaust; avoid resting the back on soft fabric.
- Power headroom: Use a quality 18 W+ USB-C adapter or a high-output power bank for TEC variants.
- Cable discipline: Loop the cable behind your fingers or grip to prevent snags mid-fight.
- Case choice: Thin cases conduct heat better; ultra-thick/insulating cases may reduce effect.
Typical Specifications (may vary by model)
- Cooling: High-RPM fan; optional TEC cold plate + heat sink
- Fan Speed: Up to ~8000–12000 RPM (mode dependent)
- Noise: ~25–38 dB(A) typical, Turbo higher
- Power In: USB-C 5 V (fan 2–5 W; TEC up to 10–12 W)
- Pass-Through: USB-C charging; 3.5 mm or USB-C audio (model dependent)
- Clamp Range: ≈65–90 mm phone width; soft pads, anti-scratch
- Lighting: Status LED or soft RGB accent
- Weight: Lightweight pocketable design
What’s in the Box
- Phone radiator fan unit
- USB-C power cable
- Spare grip pads (where included)
- Quick start guide
Care & Safety
- Keep vents clear; dust occasionally with a soft brush.
- Do not cover the cold plate or block airflow.
- Avoid moisture; unplug before cleaning.
- For TEC models, expect light condensation in very humid environments—wipe dry as needed.
.png)
